OPTIONAL SET OF LITHIUM BATTERIES AND CHARGER MODEL CP951

marco CP951

 

pdf_icon_large Download CP951 user manual »         pdf_icon_large Download CP951 recommendation sheet »

 
(NOTE: This optional set is not included as standard in the box of liners / gloveliners / mittens. For its purchase consult your retailer).
 
Standard non-rechargeable or rechargeable AA batteries are enough to power gloves / gloveliners / mittens in moderately cold climates.
However for extreme cold climates the use of the optional CP951 set is highly recommended. This set is composed of two special high-capacity rechargeable Lithium batteries and a fast charger.
The set CP951 was specially designed to provide gloves / gloveliners / mittens with notably improved performance in terms of heating power, fast heating, inner temperature control, maximum inner temperature level, autonomy of use and minimum weight. Purchasing this set will permit you to choose among four available temperature settings, notably increase maximum inner temperature and autonomy of operation rising up to 2 times.
Pekatherm highly recommends this set to improve your gloves’ performance.

GENERAL CHARACTERISTICS

Model: CP951
Reference: 951
EAN code: 843653191951 1
Description: Set of Lithium batteries and charger for gloves / gloveliners / mittens
Set composition: Two Lithium rechargeable batteries with "Smart Battery" technology and a dual-ouput charger

APPLICATION

High performance power supply for Pekatherm's gloves / gloveliners /mittens.
Through "Smart Battery" technology a button built into the battery, allows adjustment of inner temperature of gloves among four different settings.
The batteries high capacity allows for an increase of the autonomy of operation.
The charger allows for a fast charging of two batteries simultaneously.

ADVANTAGES OF CP951 SET OVER OTHER TYPES OF BATTERIES

- Increased capacity and lower weight
- High output power (allowing for a faster heating of gloves)
- Selectable output power among four different settings (allowing control of inner temperature of gloves)
- Constant discharge voltage (inner temperature of  gloves remains constant until the complete discharge of batteries).
- Allows fast charging of batteries in a shorter time than conventional batteries
- Low self-discharge rate (once charged, the batteries retain their charge without significant losses over a period of months)
- Minimum aging and capacity loss resulting from the use

TECHNICAL CHARACTERISTICS OF BATTERIES

Technology: Lithium
Nominal Output Voltage: 7.4V
Capacity: 2200mAh
Output power: 4 different settings (25-50-75-100%) selectable by a push-button
Max. output power: 15W
Working time: 9h up to 15h, depending on the model of glove (battery running at the lowest setting)
Dimensions: 70 x 50 x 20mm
Weight: 112g
Design elements:
- Push-button switch allows for both ON / OFF funtion and temperature setting (25-50-75-100%)
- Multifunction LEDs indicating power ON, selected temperature setting and battery charge/discharge status
- Audible tone buzzer

TECHNICAL CHARACTERISTICS OF CHARGER

Type: Wall-adaptor, dual output for simultaneous charging of two batteries
Input characteristic: Universal input 100-240VAC, 50/60Hz, 0.5A
Output characteristic: 8.4V DC, 1.2A
Approximate charging time: 5h (two fully discharged 7.4V 2200mAh Lithium batteries)
Dimensions: 71 x 30 x 80mm
Weight: 100g
Design elements:
- Dual output connector to simultaneously recharging two batteries
- Red/green bicolor LED indicating charge/end of charge
 
Approvals:
certificacion CE EAC
 
Presentation: Box
Compatibility:
GU900 heated gloveliners
GU91, GU910 heated gloves
GU930 heated mittens

 

 Tabla_del_CP951_en