OPTIONAL SET OF LITHIUM BATTERIES AND CHARGER MODEL CP940

marco CP940

 

pdf_icon_large Download CP940 user manual »

 
(NOTE: This optional set is not included as standard in the box of liners / gloveliners / mittens. For its purchase consult your retailer).
 
 
Standard non-rechargeable or rechargeable AA batteries are enough to power gloves / gloveliners / mittens in moderately cold climates.
However for extended autonomy of operation the use of the optional CP940 set is highly recommended. This set is composed of two special high-capacity rechargeable Lithium batteries and a fast charger.
 
The set CP940 was specially designed to provide gloves / gloveliners / mittens with notably improved performance in terms of inner temperature control, autonomy of use and minimum weight. Purchasing this set will offer notably improved temperature control and autonomy of operation rising up to 2 times.
 
Pekatherm highly recommends this set to improve your gloves’ performance.

GENERAL CHARACTERISTICS

Model: CP940
Reference: 940
EAN code: 843653191940 5
Description: Set of Lithium batteries and charger for gloves / gloveliners / mittens
Set composition: Two Lithium rechargeable batteries and a dual-ouput charger

APPLICATION

High performance power supply for Pekatherm's gloves / gloveliners / mittens.
The batteries high capacity allows for an increase of the autonomy of operation.
The charger allows for a fast charging of two batteries simultaneously.

ADVANTAGES OF CP940 SET OVER OTHER TYPES OF BATTERIES

- Increased capacity and lower weight
- High output power (allowing for a faster heating of gloves)
- Constant discharge voltage (inner temperature of  gloves remains constant until the complete discharge of batteries).
- Allows fast charging of batteries in a shorter time than conventional batteries
- Low self-discharge rate (once charged, the batteries retain their charge without significant losses over a period of months)
- Minimum aging and capacity loss resulting from the use

TECHNICAL CHARACTERISTICS OF BATTERIES

Technology: Lithium
Nominal Output Voltage: 3.7V
Capacity: 2200mAh
Max. output power: 8W
Working time: 2.5h up to 8h, depending on the model of gloves
Dimensions: 67 x 30 x 20mm
Weight: 51g

TECHNICAL CHARACTERISTICS OF CHARGER

Type: Wall-adaptor, dual output for simultaneous charging of two batteries
Input characteristic: Universal input 100-240VAC, 50/60Hz, 0.5A
Output characteristic: 4.2V DC, 1.5A
Approximate charging time: 5h (two fully discharged 3.7V 2200mAh Lithium batteries)
Dimensions: 71 x 30 x 80mm
Weight: 117g
Design elements:
- Dual output connector to simultaneously recharging two batteries
- Red/green bicolor LED indicating charge/end of charge
 
Approvals:
certificacion CE EAC
 
Presentation: Box
Compatibility:
GU91, GU910 heated gloves